Excellent product. Quick delivery. Easy to set up and use. Loads of heat, sips fuel and burns clean. Would recommend
Love this heater in my bus ...keeping us warm this Indiana winter
This little machine for the unbelievable price has gotten me through some cold nights. Easy start up and setup not a single issue yet..don't forget to prime your pump and have a backup power source.
For the price this thing is miraculous, and worth the bill. If you're using propane, switch up now and you'll never go back.
This heater puts out a ton of heat on high and can be adjusted to way low settings as wellBurns about 1 gallon a diesel for 24 hours on low and 1 gallon of diesel on high for 10 hours.A little difficult to set up since the feet are a little too short and the exhaust pipe doesn't want to bend in a full 90 so you have to force it. But once you get it the way you like it it's perfect.Comes with a remote, but be forwarned the directions aren't great (look up videos on YouTube to better understand how to operate this)All in all it keeps you warm in a small room or tent or camper. !
Overall the diesel heater works pretty well. Filling it with diesel and getting it started on a test bench on saw horses out in the driveway was simple enough. It really can put out some serious heat!I've added several pics and a video of the machine running on my slapped together test bench. The LCD's look wonky in the pics and vid because of how they work vs how cameras work but there is nothing actually wrong with them in person.The manual is configured to TRY to describe a number of different styles and LCD/Remote options. In doing it this way I doubt it actually describes ANY of them very well! The LCD screen and remote that this unit comes with is barely covered in the manual. The pic of what is where (e.g. exhaust vs. intake) is tiny and hard to understand. In short, the manual is barely useful.The fresh air intake is the one closest to the diesel fuel line, and the combustion exhaust is the other one (as it should be) further away. It would be a lot easier if they used a slightly different size or style of pipe for exhaust vs. intake (it would be bad to get them confused!).I spent the better part of an hour reading instructions for all of the units and trying things trying to figure out how to get the remote to connect to the heater unit! I'll save you the trouble, it's actually pretty simple once you figure it out:Start with the unit completely off.Press the RIGHT arrow on the blue LCD control attached to the unit and hold it until "HFA-" appears.Now press BOTH the power button and the little gear looking button on the remote at the same time. It should pair up and work now.Once paired the remote works fine and shows you what's going on with the heater and allows you to turn the goal temperature up or down.Controls for the heater, whether on the unit or VIA remote, are pretty simple. All I can really make it do is make it get hotter, or not as hot. It's basically a goal temp in degrees Celsius that you can make go up or down. That makes the heater put out more or less heat. Fan speed appears to be tied to the logic board and not able to be futzed with separately (a shame... I'd like to be able to set a constant fan speed). You can set a timer too and some other stuff but good luck trying to decipher how in the manual!Temp appears to ONLY function in Celsius but it's not a big deal. You push the button and the number goes up, heater puts out more heat, and vice versa. It could as easily be expressed in degrees of acorns for all it really matters. I'll just set it in the middle-ish and go up or down from there as needed based on whether I feel cold, hot, or comfortable!The diesel pump is clicky, but the overall unit is not very loud. Fans make noise in general so when it's really going it does sound a bit jet-engine-ish but it's hard to move air silently.Since the combustion is totally separate from the heating air and heats only through a metal exchanger, no real odor is in the heated air. This should be a pretty safe arrangement, though a CO monitor of some kind is probably wise.The casing does not get significantly hot to the touch. The exhaust tube of course gets VERY hot and you would need to take care during any installation to keep it away from anything that it could catch on fire.Inside the metal case the actual heater core is its own separate component from the tank, control, and pump with its own casing. In theory one could remove the components from the casement and do a permanent installation like some of the stand-alone options that can also be found on Amazon. That kind of defeats the suitcase all in one design but it seems it would be an option. While the suitcase style implies portability, and it does have some portability, you'll have to figure out intake air and exhaust venting strategy for each location. In my mind this makes it "semi-portable" as throwing together something on the fly to route the exhaust outside without catching whatever the exhaust tube is passing through on fire would take some fiddling.I originally wanted this unit thinking I'd use it to heat my classic VW beetle. It would do that but I am starting to think it would be overkill. This thing puts out a LOT of heat and I don't want to run it on low constantly. I think I might see if I can get a smaller unit for that car. I'm still happy to have this though as I think I'll be using it to heat my small garage over the winter when I'm working on something in there.All in all this is a useful little thing to have and I'm glad I have one! If it cost a lot more I'd rate it more harshly for some of the minor nuisances, but it doesn't cost a ton. At the price point, it's a nice workable little diesel fueled heater and I'm happy about it.
Heure de réponse: 9h à 18h, du lundi au vendredi (fuseau horaire de Hong Kong).
Envoyer à: firstname.lastname@example.org
M98 Diesel chauffage alimentable 12v tout en un.
Le nouveau radiateur à air est la deuxième génération de produits améliorés, l'avion pour maintenir le réchauffement économique et économe en carburant d'origine sur la base des caractéristiques d'une augmentation des caractéristiques de télécommande pour rendre l'opération de contrôle plus simple et plus pratique. Pour augmenter le support fixe, l'équilibre de la rotation de la roue du ventilateur est plus stable, réduisant le bruit.
Facile à installer, économique et pratique. Peut être utilisé comme dégivrage en verre de fenêtre, mais aussi pour les services d'isolation thermique sur la cabine, le studio, la cabine.
Peut être réglable la puissance de 5KW à 8KW, répondent aux différents besoins.
Peut être utilisé à des altitudes élevées, 4500 mètres au-dessus du niveau de la mer.
La télécommande du chauffage peut être connectée à l'interrupteur.
Le tout dans une seule unité, économisant de l'espace et facile à déplacer. Facile à installer et à enlever.
Le chauffage peut être appliqué pour chauffer la cabine des véhicules de transport de marchandises, des fourgonnettes, des voitures à batteries de stockage et de toutes sortes d'autres véhicules.
Peut éliminer le gel de la fenêtre.
Produit respectueux de l'environnement, faibles émissions, faible consommation de carburant; Émissions de gaz d'échappement du chauffage pour répondre aux exigences d'émissions du moteur euro IV.
La technologie volatile, par le bouchon d'allumage en céramique va chauffer le carburant évaporé dans le gaz, l'allumage rapide, la combustion complète.
L'utilisation de la technologie de contrôle automatique avancée, avec des conditions de fonctionnement anormales fiables.
Le carburant, l'électricité et la température peuvent être réglés de manière arbitraire.
Matériau: métal + plastique
Couleur: rouge + noir
Taille: 41x15.5x42cm / 16.2x6.1x16.5 "
Capacité du réservoir de carburant: 5L
Consommation de carburant: 0,1 - 0,53 L / H
Taux de combustion complet: 100%
Consommation de carburant: 0,1 litre par heure
Température de travail du radiateur: -40 ℃ ~ + 50 ℃
Température de travail de la pompe à huile: -40 ℃ ~ + 40 ℃
Distance efficace à distance: 100 mètres
1 x Réchauffeur d'air avec écran LCD
1 x Clé LCD Commutateur
1 x tuyau d'aspiration
1 x tuyau de sortie d'air
1 x tuyau d'échappement
1 x filtre à air
6 x Ensemble d'accessoires pour joints et fixations de tuyaux d'huile
1 x Instructions